From ageing fuse boxes to modern RCBO-protected boards, across Parramatta and Greater Sydney. We assess exactly what's behind the panel before quoting, so there are no surprises once the work starts.
A switchboard is the single most important safety component in your home. Original ceramic-fuse boards, still common in a large number of properties across Parramatta and Greater Sydney, don't include safety switch protection, meaning a genuine fault can't be isolated within milliseconds the way a modern RCD-protected board can. We assess exactly what's behind your panel before quoting, since the right fix depends entirely on what's actually there, not just the property's age.
Replacing original fuse boxes with modern RCBO-protected boards, from a straightforward swap to a full rebuild.
RCD safety switch installation for homes still relying on ceramic fuses without current protection.
Testing existing safety switches and certifying them for rental compliance and general peace of mind.
Switchboard upgrades and conversions to accommodate three-phase power for larger properties.
Moving a switchboard as part of a renovation, extension, or general property change.
Accredited Level 2 work on consumer mains and service connections where the upgrade goes beyond the meter.
Any one of these is worth a proper assessment. More than one, and it's worth booking now rather than later.
Everything from your meter into your home, your switchboard, circuits, and wiring. Carried out by any fully licensed electrician, which covers the large majority of switchboard upgrades.
The service main connecting your property to the street. Legally requires accreditation as a Level 2 Accredited Service Provider, on top of a standard electrical licence, which we hold.
Many switchboard upgrades on older properties, particularly where consumer mains also need replacing, cross into Level 2 territory once properly assessed. A genuine quote should clearly separate this cost from standard Level 1 work, since it's priced differently and Ausgrid and Endeavour Energy accredit providers separately for their own network areas.
Honest ranges, not a single number that ignores what's actually behind your panel.
Final price depends on your board's condition, whether asbestos is present, and whether the job touches the consumer mains. We assess this on site before quoting, not after.
A standard switchboard upgrade costs $1,800 to $3,500, depending on your board's condition. If asbestos meter board removal is needed, add $800 to $1,800. If the job touches the consumer mains, that's Level 2 work, typically $600 to $2,500 on top.
Flickering lights under load, breakers that trip repeatedly, round ceramic fuses instead of modern breakers, or any buzzing, warmth, or burning smell are the clearest signs. The first three mean it's worth scheduling, the last means call today.
Level 2 work covers anything on the network side of your meter, the service main connecting your property to the street. It requires accreditation as a Level 2 Accredited Service Provider on top of a standard electrical licence, which we hold.
No, but it's genuinely common in properties built before about 1990 across the Parramatta area, where the meter backing board is often asbestos cement sheet. We check for this on site and tell you upfront, not partway through the job.
Based in Parramatta, servicing 50 suburbs across Greater Sydney. Response time is fastest closer to our base, and we're upfront about that rather than promising the same everywhere.
Switchboards are one of 12 categories we cover. Here's what else we do.
We'll assess your switchboard properly and give you a straight answer, due now or safe to schedule.