Laundry Appliance Electrical Requirements | Washers & Dryers
Home / Blog / Laundry Appliance Electrical Requirements
Cost Guide

Laundry Appliance Electrical Requirements: Washing Machines and Dryers

Quick Answer

Washing machines and dryers are generally wired on their own, properly protected power points within the laundry, rather than sharing a point meant for other appliances. Adding a new dedicated laundry power point typically costs $150 to $350.

Do Washing Machines and Dryers Need Their Own Circuit?

Each major laundry appliance is best served by its own properly rated power point, rather than sharing a single point between a washing machine, dryer and anything else. This avoids overloading one circuit and keeps each appliance's connection straightforward to isolate for servicing.

Laundries Are a Wet Area: What That Means Electrically

Laundries, like bathrooms, are treated as a wet area under the wiring rules, meaning power points and fittings need to account for moisture exposure from washing and general laundry use. This affects fitting selection and positioning, confirmed by your electrician for your specific layout.

Heat Pump vs Vented Dryers: Does the Wiring Differ?

Heat pump dryers generally draw noticeably less power than standard vented electric dryers, since they work by recycling and reusing heat rather than continuously generating it. This can affect the circuit sizing needed, worth mentioning to your electrician if you're choosing between dryer types as part of a laundry setup or renovation.

What the Electrical Work Actually Involves

  • A dedicated, correctly rated power point for each major appliance.
  • Wet-area appropriate fittings suited to the laundry's layout.
  • RCD protection on the laundry's circuits.
  • Correct positioning relative to taps and water connections, coordinated with any plumbing work.

What Pushes the Price Up

Adding a new dedicated power point where none currently exists, rather than just confirming an existing one is adequate, is the main driver of cost. Difficult wall access, and coordinating the work around a broader laundry renovation, can also add to the total.

Key Takeaways

  • Washing machines and dryers typically run on their own properly rated power points rather than sharing with other appliances.
  • Laundries are treated as a wet area, meaning specific electrical safety requirements apply.
  • Heat pump dryers generally draw less power than vented electric dryers, which can affect circuit sizing.
  • Adding a new dedicated laundry power point typically costs $150–$350.
  • RCD (safety switch) protection applies to laundry circuits the same as any other area of the home.
Common questions

Frequently Asked Questions

It's not the recommended setup. Each appliance is generally better served by its own properly rated power point and connection, rather than sharing one between them.

Laundries are treated as a wet area under the wiring rules, so fittings and installation need to account for moisture exposure, similar in principle to bathroom requirements.

Often, yes. Heat pump dryers typically draw less power, which can mean different circuit requirements compared to a standard vented electric dryer, confirmed by your electrician based on the specific unit.

Need an electrician? Call now.

Licensed, insured, on-site fast. Available 24/7.

1300 415 254