Dimmer Switches Explained: Leading-Edge vs Trailing-Edge
Home / Blog / Dimmer Switches Explained
Safety Guide

Dimmer Switches Explained: Leading-Edge vs Trailing-Edge

Quick Answer

A dimmer switch needs to be matched to the type of lighting it controls. Trailing-edge dimmers are generally the better match for LED lighting, giving smoother dimming with less flicker, while older leading-edge dimmers, designed for halogen loads, often cause flickering or a limited dimming range when paired with LEDs.

Why the Dimmer Type Actually Matters

Older dimmer technology, built for the steady, simple load of a halogen or incandescent globe, doesn't always suit the way LED drivers manage power. Using the wrong dimmer type with LED lighting is one of the most common, and most fixable, causes of flickering, buzzing or a dimmer that won't dim smoothly down to a low level.

Leading-Edge Dimmers: Built for Halogen

Leading-edge dimmers were the standard for years, designed around halogen and incandescent lighting's predictable load. They can work with some LED fittings, but results are inconsistent, flickering, a limited dimming range, or an audible buzz are common complaints when a leading-edge dimmer is paired with LEDs it wasn't really designed for.

Trailing-Edge Dimmers: The Better Match for LED

Trailing-edge dimmers handle the way LED drivers draw power more smoothly, generally giving a cleaner dimming curve with less flicker and a lower minimum dim level. They're the more commonly recommended choice when installing or replacing a dimmer specifically for LED downlights or strip lighting.

It's Not Just the Dimmer: Checking the Fitting Too

Swapping to a trailing-edge dimmer doesn't guarantee a perfect result if the LED fittings themselves aren't rated as dimmable, or if too many fittings are connected to one dimmer beyond its rated capacity. Compatibility runs both ways, the dimmer and the fittings both need to be right for a smooth result.

Fixing an Existing Flickering Dimmer Setup

If you're experiencing flickering or buzzing on an existing dimmer circuit, a licensed electrician checks both halves of the problem, the dimmer type installed and the actual LED fittings connected to it, rather than guessing which one to replace first.

Key Takeaways

  • Leading-edge dimmers were designed for halogen and incandescent loads, not LEDs.
  • Trailing-edge dimmers generally give smoother, more reliable dimming with LED lighting.
  • A mismatched dimmer is the most common cause of flickering or a limited dimming range on LED downlights and strip lighting.
  • Not all LED fittings are dimmable at all, check the fitting's own rating before assuming any dimmer will work.
  • Swapping just the dimmer, without checking compatibility with the actual LED fittings installed, often doesn't fully solve a flickering problem.
Common questions

Frequently Asked Questions

No, dimmer switches are connected to your home's fixed wiring, and replacing one is licensed electrical work in NSW, even though the switch itself looks like a simple component.

It's often a mismatch between the dimmer type (commonly an older leading-edge dimmer) and how the LED driver manages power, rather than a fault with the globe or fitting itself.

No, dimmable and non-dimmable LED fittings both exist, check the specific fitting's own rating. A dimmer switch, even the right type, won't properly dim a non-dimmable fitting.

Need an electrician? Call now.

Licensed, insured, on-site fast. Available 24/7.

1300 415 254