Christmas and Festive Lighting Electrical Safety | 2026 Guide
Home / Blog / Christmas and Festive Lighting Electrical Safety
Safety Guide

Christmas and Festive Lighting Electrical Safety

Quick Answer

Outdoor Christmas and festive lighting should always run through a weatherproof-rated power point and, ideally, a portable RCD safety switch. The most common fault each festive season is an overloaded power point or power board from stacking too many light strings onto one circuit.

Why Festive Lighting Causes a Seasonal Spike in Electrical Faults

Every festive season brings a predictable rise in faults from overloaded circuits, damaged outdoor leads, and lighting left running continuously for weeks at a time, far more demand than the same power point sees for the rest of the year.

Checking Your Outdoor Power Points Before You Start

Confirm you're plugging into a weatherproof-rated outdoor power point, not running a lead from an indoor point out through a door or window for the whole festive season. Check the point itself for any signs of damage or wear before you start adding lighting to it.

How Many Light Strings Is Too Many?

It depends entirely on each string's wattage and the capacity of the circuit you're using, there's no single safe number that applies to every setup. Check the total load of everything plugged into one power point or power board against its rating, and when in doubt, spread your lighting across more than one circuit rather than daisy-chaining everything onto one.

Using Extension Leads and Timers Safely Outdoors

Use outdoor-rated extension leads only, and inspect them for cracks, cuts or exposed wire before each use, insulation on leads left outdoors degrades with sun exposure over successive seasons even if it looks fine at a glance. A timer is a simple, worthwhile addition, both for safety and to avoid lights running unnecessarily overnight.

When to Call an Electrician Instead of DIY-ing It

If you're planning a significant permanent or semi-permanent outdoor lighting display, want a dedicated outdoor circuit installed, or you've noticed any warmth, buzzing or tripping from an existing outdoor point, that's worth a licensed electrician's attention rather than working around the problem with more extension leads.

Key Takeaways

  • Overloaded power points from too many light strings are the most common festive lighting electrical fault.
  • Outdoor lighting needs a weatherproof-rated power point, not an indoor point with a lead run outside long-term.
  • A portable RCD safety switch adds meaningful extra protection for temporary outdoor lighting setups.
  • Check last year's lights and leads for sun damage before reusing them, insulation degrades over time outdoors.
  • A permanent outdoor power point is worth considering if you put up significant lighting every year.
Common questions

Frequently Asked Questions

It depends on each string's wattage and your circuit's capacity, check the total combined load against the power point and power board's rating rather than guessing, and use fewer strings or spread the load across more points when in doubt.

Many modern LED light strings are designed for extended outdoor use, but it's worth using a timer regardless, both for safety peace of mind and to reduce running costs over the festive period.

Yes. An indoor-rated power point isn't designed for outdoor moisture exposure, and running a lead outside from an indoor point for an extended period isn't a safe long-term setup.

Need an electrician? Call now.

Licensed, insured, on-site fast. Available 24/7.

1300 415 254