Installing LED strip or under-cabinet lighting typically costs $200 to $600 in 2026, depending on the length of strip, the number of zones, and whether a dimmer or smart control is included.
How Much Does LED Strip Lighting Cost?
A straightforward under-cabinet or strip lighting installation in a kitchen, hardwired to an existing circuit via a switch, typically costs $200 to $600, depending on the total strip length and number of separately switched zones.
Understanding the Driver: Why It Matters
LED strip lighting runs on low voltage, stepped down from mains power by a driver (a type of transformer). The driver needs to be sized correctly for the total wattage of all the strip connected to it, an undersized driver can overheat, shorten the strip's lifespan, or fail prematurely.
Hardwired vs Plug-In Strip Lighting
A basic plug-in LED strip kit, bought as a complete consumer product and run from a power point, generally doesn't involve an electrician. Hardwiring strip lighting into a wall switch and an existing circuit, the more common approach for a permanent kitchen or joinery installation, is licensed electrical work and gives a tidier result with no visible cords or plugs.
What the Electrical Work Actually Involves
- Driver selection and sizing for the total strip length and desired brightness.
- Connection to an existing circuit via a new or existing switch.
- Dimmer compatibility checked and matched if dimming is wanted.
- Concealment of the driver, typically inside a cabinet or ceiling void, keeping it accessible for future servicing.
What Pushes the Price Up
Multiple separately switched or dimmable zones cost more than a single run of strip on one switch. Smart, app- or voice-controlled strip lighting systems add to the cost over a basic switched setup, and difficult access to run cable back to an existing circuit (particularly in a kitchen renovation with limited wall cavity access) can also add time.
Key Takeaways
- Typical cost range is $200–$600 for a kitchen's worth of under-cabinet or strip lighting.
- LED strips run on low voltage and need a compatible driver (transformer) sized to the total strip length.
- Dimmable strip lighting needs a dimmable driver and compatible switch, not just any dimmer.
- Hardwired strip lighting, connected to a switch rather than a plug, is tidier and more durable than plug-in kits, but is licensed electrical work.
- Coving, stair-tread and kickboard lighting all use the same low-voltage strip principle as under-cabinet lighting.