Running power to a detached shed or workshop typically costs $800 to $2,500 in 2026, mainly driven by the distance from the switchboard and whether the cable needs to be trenched underground. A shed close to the house with easy access sits at the lower end; a workshop further out needing significant trenching sits at the higher end.
How Much Does It Cost to Run Power to a Shed?
For a shed or workshop reasonably close to the house with straightforward access, running power typically costs $800 to $1,500. A shed further from the house, or one needing a longer trench through a difficult garden, paving or concrete, can cost $1,500 to $2,500 or more.
Overhead vs Underground: Which Does Your Property Need?
Underground cable is the more common and tidier option for most residential properties, run in approved conduit at a compliant depth. An overhead cable between two support points is sometimes used where trenching isn't practical, though it needs adequate clearance and its own compliance considerations. Your electrician will usually recommend the better option once they've seen the property.
What the Electrical Work Actually Involves
- Trenching and conduit — underground cable run at a compliant depth, protected in conduit.
- A dedicated circuit from the main switchboard, sized to what the shed will actually run.
- RCD (safety switch) protection on the new circuit, same requirement as any other circuit in the home.
- Testing and certification once the circuit is complete and connected.
Do You Need a Sub-Board in the Shed?
If the shed will only run a light and one or two power points, a single circuit back to the main switchboard is often enough. A workshop running power tools, a fridge, lighting and perhaps a welder benefits from its own small sub-board, splitting the supply into separate circuits so one tripped breaker doesn't take out everything in the shed at once.
What Pushes the Price Up
Longer cable runs and difficult trenching (through established paving, concrete, or garden beds with existing plumbing or irrigation to work around) are the main cost drivers. A sub-board with multiple circuits costs more than a single circuit, and a workshop running heavier equipment may need a larger cable size than a shed used mainly for storage and lighting.
Key Takeaways
- Typical cost is $800–$2,500, depending mainly on distance and trenching.
- Underground cable needs a specific burial depth and conduit under the wiring rules, not just buried bare.
- A shed with several circuits (lighting, power, equipment) usually gets its own sub-board.
- Trenching through concrete, paving or garden beds adds significantly to the cost.
- A dedicated circuit is required — a permanent extension lead running to a shed isn't a compliant substitute.