Never connect a portable generator directly into a power point or your switchboard. Doing so can backfeed electricity into the street network and seriously injure or kill utility workers repairing the outage. A generator can only safely power your home's wiring through a properly installed transfer switch fitted by a licensed electrician.
Why You Should Never "Backfeed" a Generator Into Your Switchboard
Plugging a generator into a power point to feed electricity back through your home's wiring, sometimes called backfeeding, pushes electricity out through your switchboard and onto the street network the same way your home normally draws power in. Utility workers rely on the network being de-energised during an outage to repair it safely. A backfed generator can re-energise supposedly dead lines, putting their lives at serious risk, as well as risking damage to your own switchboard and appliances.
How a Transfer Switch Makes Generator Backup Safe
A transfer switch, installed by a licensed electrician, physically isolates your home's wiring from the street network before allowing the generator to power selected circuits. It makes it impossible for the generator to backfeed into the network, because the home's supply and the generator supply are never connected to the grid at the same time. This is the only compliant way to have a generator power your home's existing circuits.
Generator vs Home Battery: What's the Real Difference?
A generator produces power on demand by burning fuel, giving you backup for as long as you have fuel to run it, but it needs manual setup (or a transfer switch for whole-circuit backup), ventilation, and regular refuelling. A home battery stores energy charged in advance, usually from solar or the grid, and typically switches over automatically within moments of an outage with no fuel, fumes, or manual intervention, though its backup duration is limited by its stored capacity rather than fuel supply.
Running Extension Leads From a Generator: What's Safe
Without a transfer switch installed, the safe way to use a generator is to run individual appliances directly from the generator's own power outlets using heavy-duty, outdoor-rated extension leads, never by plugging the generator into a wall power point. Keep the generator running outdoors in a well-ventilated area, well away from doors, windows and air intakes, since it produces carbon monoxide.
What to Do When the Power Goes Out
Check whether neighbours also have no power to work out if it's a street-wide network outage or isolated to your property. For a network-wide outage, contact your electricity distributor for updates rather than your electrician. If you rely on backup power for medical equipment or similar essential needs, that's worth planning for in advance with a properly installed transfer switch or battery system, not worked out for the first time during an actual blackout.
Key Takeaways
- Backfeeding a generator into household wiring can send live electricity back into the street network, a genuine risk to utility workers' lives.
- A transfer switch, installed by a licensed electrician, is the only safe way to connect a generator to your home's circuits.
- Without a transfer switch, run devices directly from the generator's own outlets using proper outdoor-rated extension leads.
- Home batteries store energy in advance and switch over automatically, with no fuel, fumes or backfeed risk once correctly installed.
- Generators suit occasional, portable backup; batteries suit homes wanting automatic, ongoing backup, often paired with solar.