Power Point Installation Cost in Australia | 2026 Price Guide
Home / Blog / Power Point Installation Cost in Australia
Cost Guide

Power Point Installation Cost in Australia: 2026 Price Guide

Quick Answer

A single new power point installed in Australia typically costs $120 to $250 in 2026, mainly depending on wall access and how far the cable needs to run back to an existing circuit. Installing several power points in the same visit usually brings the per-point cost down.

How Much Does One Power Point Cost?

A single general power point, installed by tapping into an existing nearby circuit, typically costs $120 to $250 in most parts of Australia in 2026. That figure covers the outlet itself, the cabling back to the nearest accessible point on the circuit, and testing. It assumes reasonably easy wall and roof access, a power point added in a more difficult spot costs more.

What Changes the Price?

  • Wall type — plasterboard is quick to cut into and patch; brick, concrete or tiled walls need to be chased out, which takes longer and costs more.
  • Distance from an existing circuit — a power point near an existing outlet or the switchboard is cheaper than one on the far side of the house.
  • Roof or subfloor access — a power point that needs cable run through a tight or inaccessible roof space takes longer to install.
  • Number of points in one visit — adding four or five power points around a renovation is cheaper per point than four separate single callouts.

Do I Need a New Circuit or Can It Share an Existing One?

Most general power points can safely share an existing circuit, provided that circuit has spare capacity. High-draw fixed appliances, like an oven, a hot water system, or an EV charger, need their own dedicated circuit run directly from the switchboard, which is priced separately and covered in more detail in our guides on those specific jobs.

USB and Smart Power Points: Do They Cost More?

A built-in USB power point or a Wi-Fi-enabled smart power point typically costs $20 to $60 more than a standard outlet, reflecting the higher cost of the fitting itself rather than extra labour. The electrical work involved is otherwise the same.

What to Check Before You Sign a Quote

Confirm whether the quote is per point or a flat price for the whole job, whether wall patching and paint touch-up after chasing into brick or concrete is included, and whether the existing circuit has been checked for spare capacity before the new point is added, rather than assumed.

Key Takeaways

  • A standard single power point costs $120–$250 installed, reusing an existing circuit.
  • A new dedicated circuit for a high-draw appliance adds $150–$300 on top of the outlet itself.
  • Brick and concrete walls cost more to chase into than plasterboard.
  • USB and smart power points typically add $20–$60 over a standard outlet.
  • Installing multiple power points in one visit is cheaper per point than separate callouts.
Common questions

Frequently Asked Questions

No. Installing or modifying a power point is electrical work restricted to a licensed electrician under NSW law, even though the outlet itself looks like a simple fitting.

Yes, generally. Adding power points while walls are already open during a renovation avoids the extra cost of chasing into finished walls and patching afterwards.

Reusing an existing circuit with reasonable access, a single power point usually takes 30 minutes to an hour. A point needing a new circuit or difficult access takes longer.

Need an electrician? Call now.

Licensed, insured, on-site fast. Available 24/7.

1300 415 254