The Real Cost Range
Swapping old halogen downlights for LED in Sydney typically costs $65 to $120 per light when the existing wiring and ceiling points are reused, a straightforward like-for-like replacement. A whole-home swap-out, say 20 to 25 downlights in an average house, usually lands somewhere between $1,500 and $3,000 depending on access and the fittings chosen.
Adding brand new downlight positions, rather than replacing existing ones, costs more again, because it means running new cabling through the roof space to each new point rather than reusing what's already there.
Why Replace Old Halogen Downlights
Halogen downlights run hot, draw significantly more power than LED, and the transformers that power them fail over time, that's usually what's behind a downlight that's gone completely dead rather than just dimmed. LED downlights use a fraction of the electricity, run far cooler, and most have a rated lifespan well beyond ten years of normal use.
What the Electrical Work Actually Involves
- Removing the old transformer — most integrated LED downlights don't need one, so it comes out rather than being left dead in the roof space.
- Confirming IC rating — any downlight sitting in or near ceiling insulation needs to be IC-rated (insulation contact rated) to stay compliant and safe.
- Dimmer compatibility — older dimmer switches are often built for halogen loads and don't play well with LEDs, flickering or buzzing is the usual symptom, so the dimmer sometimes needs replacing alongside the downlights.
- Testing each circuit — checking for a consistent colour temperature and no flicker across every downlight on the circuit before calling the job done.
What Pushes the Price Up
Difficult roof access (low clearance, multiple storeys, no manhole near the work area) adds time and therefore cost. So does retrofitting insulation compliance, if your ceiling has insulation sitting directly on old non-IC-rated downlights, that's actually a fire risk that needs addressing as part of the job, not an optional extra. Adding genuinely new downlight positions, rather than replacing existing ones, is priced separately since it involves running new cable.
Things to Check Before You Sign a Quote
Confirm whether the quote is per downlight or a flat whole-home price, whether IC-4 rated fittings are included if you have ceiling insulation, and whether your existing dimmer switches are covered or priced separately. We check all of this during a quick on-site look before quoting, not after the roof's already open.